1 X MTC Exhausts Single outlet DECIBEL KILLER / BAFFLE For Left handed exhaust

The 1 x mtc exhausts single outlet decibel killer / baffle for left handed exhaust is the smart, straightforward solution for riders who need to bring their noise levels under control without sacrificing the quality or character of their performance can. Whether you’re heading to a noise-restricted track day, navigating local regulations, or simply want a quieter ride through built-up areas, this precision-engineered baffle is exactly what you need. Built by the team at Max Torque Cans, this decibel killer is designed specifically to fit our own Single Outlet Max Torque Can exhausts in a left-handed configuration, ensuring a proper, secure fit every single time.

What Is the 1 x MTC Exhausts Single Outlet Decibel Killer / Baffle for Left Handed Exhaust?

A decibel killer — sometimes referred to as a baffle — is an internal insert that fits inside the outlet of your silencer to reduce the overall noise output. It works by disrupting and absorbing sound waves as exhaust gases pass through, effectively lowering the decibel reading at the outlet without permanently altering your can or affecting its structural integrity. The 1 x mtc exhausts single outlet decibel killer / baffle for left handed exhaust is manufactured in-house here at Max Torque Cans, giving us full control over quality, dimensions, and finish.

This product is sold as a single unit — one decibel killer — designed for riders running a single outlet, left-handed performance exhaust from the Max Torque Cans range. If you’re unsure whether your can is left-handed or right-handed, the simplest way to check is to sit on the bike and look at which side the outlet faces. A left-handed exhaust exits to the left of the motorcycle when viewed from the rider’s position.

Why Choose the 1 x MTC Exhausts Single Outlet Decibel Killer / Baffle for Left Handed Exhaust?

Not all baffles are created equal. A poorly fitting insert can rattle, fall out at speed, or restrict performance unnecessarily. Because the 1 x mtc exhausts single outlet decibel killer / baffle for left handed exhaust is made specifically for our own cans, you can be confident that it will fit correctly, stay put, and perform as intended. Here are just some of the key reasons riders choose this baffle:

• 304 Grade Stainless Steel Construction: Every single decibel killer we produce is made from 304-grade stainless steel — the same high-quality material used in our exhausts themselves. This means outstanding resistance to heat, corrosion, and the general punishment of everyday riding conditions.
• Precision Fitment: Machined and finished to fit our Single Outlet Max Torque Can exhausts with accuracy. No rattling, no movement, no headaches.
• Reversible Solution: Want to go loud again for track days and then quiet it down for the road? Simply remove or reinsert the baffle as needed. There’s no permanent modification involved.
• Noise Compliance: Ideal for track days with strict dB limits, or for riding through areas where noise ordinances apply. Keep your bike legal and keep riding.
• Lightweight: Stainless steel doesn’t mean heavy. This insert adds negligible weight to your setup.
• Made in the UK: Proudly produced by Max Torque Cans, a British brand with a reputation for quality performance exhausts and accessories.

Fitment Guide for the 1 x MTC Exhausts Single Outlet Decibel Killer / Baffle for Left Handed Exhaust

This baffle is designed exclusively for use with Max Torque Cans’ own Single Outlet performance cans in a left-handed configuration. It is not a universal baffle and will not be guaranteed to fit third-party silencers or other brands’ cans. Attempting to fit it to an incompatible outlet could result in a poor seal, reduced effectiveness, or potential damage.

Before purchasing, please confirm the following:

• Your can is a Max Torque Cans Single Outlet exhaust — not a dual outlet or a can from another manufacturer.
• Your exhaust is left-handed, meaning the outlet exits on the left-hand side of the motorcycle when seated.
• Your can is in good condition with a clean, undamaged outlet, allowing the baffle to seat properly.

If you have any doubts about compatibility, please get in touch with us before ordering. We’re always happy to help you identify the correct part for your specific setup.

Installation Notes for the 1 x MTC Exhausts Single Outlet Decibel Killer / Baffle for Left Handed Exhaust

Installing your new decibel killer is a simple process that most riders can carry out at home with minimal tools. Here’s what to expect:

• Allow the exhaust to cool completely before attempting installation. Never work on a hot can.
• Insert the 1 x mtc exhausts single outlet decibel killer / baffle for left handed exhaust into the outlet of your Single Outlet Max Torque Can, ensuring it seats fully and securely.
• Most of our baffles are retained by a single bolt or pin. Secure the baffle as directed to prevent it from loosening under vibration.
• Once fitted, take the bike for a short, careful test ride and listen for any unusual sounds such as rattling or increased back pressure.
• To remove, simply reverse the process once the silencer has fully cooled.

We recommend inspecting your baffle periodically, especially if you ride frequently or in harsh conditions. Even stainless steel benefits from a quick check to ensure everything remains tight and in good order.

Frequently Asked Questions

Will this baffle fit any exhaust from any brand?

No. The 1 x mtc exhausts single outlet decibel killer / baffle for left handed exhaust is engineered to fit Max Torque Cans’ own Single Outlet cans specifically. We cannot guarantee fitment on exhausts from other manufacturers.

Will it significantly reduce performance?

A baffle will introduce a small degree of back pressure, which may have a marginal effect on peak performance in some cases. However, for the vast majority of road riders, this difference is imperceptible. The primary purpose of this product is noise reduction, and it does that job very well without turning your performance exhaust into a restricted, lifeless silencer.

Can I use the baffle for track days?

Absolutely. In fact, this is one of the most popular reasons riders purchase the 1 x mtc exhausts single outlet decibel killer / baffle for left handed exhaust. Many UK track days enforce strict noise limits, and this baffle can help bring your bike within those limits so you can enjoy a full day’s riding without being turned away at the gate.

Is the stainless steel finish durable?

Yes. 304 Grade Stainless Steel is highly resistant to heat, oxidation, and corrosion, making it an excellent choice for exhaust components. Your baffle should provide years of reliable service under normal riding conditions.

If you’re looking to complement your Max Torque Cans setup further, why not take a look at our BSA Gold Star de res pipe 304 Stainless Steel — another fine example of our commitment to quality stainless steel exhaust components. Or, if you’re after some serious performance upgrades, check out the Aprilia RS660 De-Cat DownPipes for a taste of what Max Torque Cans can do further up the exhaust chain.

Order your 1 x mtc exhausts single outlet decibel killer / baffle for left handed exhaust today and enjoy the confidence of a purpose-built, British-made accessory that fits perfectly, performs reliably, and keeps you on the road — and on the track — without compromise.