Stainless Exhaust Body Strap & Rubber fits Ø110mm Exhaust & has offset mount

“`html

The stainless exhaust body strap & rubber fits Ø110mm exhaust & has offset mount represents precision engineering at its finest, delivering the robust, rattle-free security that serious motorcyclists demand when mounting performance silencers and aftermarket exhaust cans. Manufactured in the UK by Max Torque Cans, this component is far more than a simple clamp—it is a carefully designed mounting solution engineered to withstand the punishing combination of vibration, thermal cycling, and road shock that exhaust hardware endures over thousands of miles.

Whether you are installing a brand-new performance can, replacing tired or corroded mounting hardware, or simply upgrading every detail of your build to professional standards, this premium stainless steel strap delivers the quality and reliability your motorcycle deserves.

At Max Torque Cans, we apply the same obsessive attention to detail to every component we produce, from complete exhaust systems down to the smallest mounting bracket. We understand that exhaust mounting hardware is not merely an accessory—it is a critical safety component that must perform flawlessly under demanding conditions.

A loose or poorly engineered strap can allow your silencer to shift position under hard acceleration, leading to potential contact with bodywork, frame rails, or the rear tyre. Worse still, inadequate clamping can cause stress fractures in the exhaust body itself or damage expensive silencers through excessive vibration. That is why we manufacture our straps in-house using only premium 304 grade stainless steel at a substantial 1.2mm wall thickness, paired with high-temperature silicone rubber inserts that protect your exhaust finish while absorbing vibration across the entire service life of your machine.

Why the Stainless Exhaust Body Strap & Rubber Fits Ø110mm Exhaust & Has Offset Mount Is Essential for Performance Builds

When you are mounting a silencer or performance can with a 110mm body diameter, precision fitment is absolutely critical. Generic clamps and universal straps may appear similar on the surface, but they lack the dimensional accuracy required for a secure, professional installation. The stainless exhaust body strap & rubber fits Ø110mm exhaust & has offset mount is manufactured specifically for exhausts measuring Ø110mm in diameter, ensuring a perfect fit without the need for shimming, packing, or guesswork.

This precision not only improves clamping security but also ensures even load distribution around the circumference of your exhaust body, minimising the risk of localised stress or surface marking on expensive stainless steel, titanium, or carbon fibre cans.

The offset mount configuration is a particularly thoughtful design feature that sets this strap apart from standard alternatives. Many larger-diameter performance silencers require the mounting lug to be positioned off-centre relative to the strap body in order to clear frame rails, subframe sections, swingarm components, or other chassis obstructions. The offset mount gives you that critical clearance without requiring custom fabrication, spacers, or awkward bracket modifications.

It is exactly the kind of engineering detail that separates a clean, factory-quality installation from a compromised solution that will frustrate you every time you work on the bike. According to guidance from Motorcycle News, proper exhaust mounting is essential not only for performance but also for safety and long-term durability on modern machines.

The strap is 30mm wide, which distributes clamping load evenly and reduces the risk of distorting or marking the surface of your exhaust body. A wider contact area means less concentrated pressure at any single point, which is particularly important if you have invested in a high-quality silencer with a polished, brushed, or coated finish.

The included silicone rubber insert lines the inside of the strap and further cushions the contact zone, absorbing vibration and protecting your exhaust across tens of thousands of miles of hard riding. Silicone is the material of choice for performance exhaust applications because it tolerates elevated temperatures without hardening, cracking, or losing its compliance—unlike natural rubber or EPDM alternatives, which can perish when exposed to exhaust heat over time.

Materials and Construction: What Makes the Stainless Exhaust Body Strap & Rubber Fits Ø110mm Exhaust & Has Offset Mount Outlast the Competition

The choice of 304 grade stainless steel is deliberate and essential. Grade 304 offers an excellent balance of strength, formability, and corrosion resistance, making it ideal for the harsh under-bike environment where exhaust components live. It handles repeated heat cycling without warping, resists the salt, moisture, and road grime that UK roads throw at your machine year-round, and maintains its structural integrity even after years of hard service.

At 1.2mm wall thickness, this strap is robust enough to handle the vibration loads generated by high-performance single-cylinder, parallel-twin, V-twin, and inline-four engines alike. You can torque your mounting bolt with confidence, knowing the strap will not deform, crack, or fatigue around the mount point.

The silicone rubber bonded to the inner face is equally high quality. Silicone retains its flexibility and grip across a wide temperature range, making it far superior to standard rubber in exhaust applications. Unlike cheaper materials that harden and crack after exposure to heat and vibration, silicone remains compliant and effective throughout the service life of your exhaust system.

That combination of stainless steel and silicone rubber is precisely why the stainless exhaust body strap & rubber fits Ø110mm exhaust & has offset mount outlasts cheaper alternatives season after season, delivering the same secure, vibration-free performance year after year. This same commitment to material excellence extends across our entire product range, including precision-engineered components like our Ferrari 348 Stainless Steel Catalyst Replacement Pipes 1990-94, where premium stainless steel construction ensures decades of reliable service.

Technical Specifications: Stainless Exhaust Body Strap & Rubber Fits Ø110mm Exhaust & Has Offset Mount

• Material: 304 grade stainless steel, 1.2mm wall thickness
• Width: 30mm
• Exhaust body diameter: Ø110mm
• Mount type: Offset mount configuration
• Liner: High-temperature silicone rubber insert included
• Quantity: Single strap per listing
• Finish: Brushed stainless steel
• Manufacture: Made in the UK by Max Torque Cans

Fitment Guide: Installing Your Stainless Exhaust Body Strap & Rubber Fits Ø110mm Exhaust & Has Offset Mount

Installation is straightforward, but there are a few points worth bearing in mind to achieve the best possible result. Before fitting, confirm that your exhaust body measures Ø110mm at the point where the strap will sit. The stainless exhaust body strap & rubber fits Ø110mm exhaust & has offset mount is precision-made for that exact diameter, so attempting to fit it to a 100mm or 120mm can will result in either a sloppy fit or an inability to close the strap correctly.

A quick check with a set of calipers takes thirty seconds and will save you a great deal of frustration.

When positioning the strap, take full advantage of the offset mount to route your mounting bracket or support arm cleanly past any frame obstructions. Offer up the strap to the exhaust body before tightening to make sure you are happy with the mount orientation relative to your subframe or hanger bracket.

The silicone rubber liner will grip the exhaust body lightly as you begin to tighten, helping to hold the strap in position while you locate and thread your fastener. Tighten progressively and evenly—there is no need to over-torque. The 30mm width and 1.2mm wall thickness mean the strap has ample strength at moderate clamping loads.

Over-tightening risks distorting the strap geometry and defeating the protective purpose of the silicone liner.

Once fitted, give the exhaust a firm shake by hand to confirm everything is solid before taking the bike out for a run. After your first ride, it is good practice to re-check the tightness once the exhaust has heat-cycled a couple of times, as thermal expansion and contraction can cause initial settling.

This strap is particularly well suited to aftermarket cans fitted to naked bikes, sportsbikes, café racers, and adventure machines where large-diameter silencers are common. The robust construction and thoughtful engineering mirror the quality standards we apply across all Max Torque Cans products, ensuring every component performs to the highest standard regardless of application.

Frequently Asked Questions

Q: Does this listing include more than one strap?
No—each listing covers a single strap. If your silencer requires two mounting points, please add two to your basket.

Q: What does “offset mount” mean in practice?
The mounting lug on the stainless exhaust body strap & rubber fits Ø110mm exhaust & has offset mount is positioned offset from the centreline of the strap body. This provides clearance around frame rails or subframe sections that would obstruct a centrally-mounted lug, giving you a cleaner and more secure installation on a wider range of motorcycles.

Q: Will this strap fit a carbon fibre or titanium can?
Yes, provided the external body diameter is Ø110mm. The silicone rubber liner protects the surface of your can regardless of the material it is made from. We would always recommend confirming your exact body diameter with calipers before ordering.

Q: Can I use this strap on a high-heat application?
Absolutely. Both 304 stainless steel and silicone rubber are chosen specifically for their ability to withstand the