TRI OVAL Exhaust Body Strap & Rubber fits Ø110mm Exhaust & has offset mount

The tri oval exhaust body strap & rubber fits Ø110mm exhaust & has offset mount is one of the most precisely engineered mounting solutions available for riders who demand a secure, rattle-free fit on their performance silencer or can. Whether you are fitting a brand-new aftermarket can, refurbishing an existing setup, or simply replacing a worn-out strap that has seen better days, this accessory delivers the quality and reliability you need without compromise. Built with serious motorcyclists firmly in mind, this strap is the kind of no-nonsense hardware that makes all the difference when you are out on the road, mile after mile.

Why the Tri Oval Exhaust Body Strap & Rubber Fits Ø110mm Exhaust & Has Offset Mount Is the Right Choice for Your Bike

Not all exhaust straps are created equal, and if you have ever dealt with a loose can vibrating against the frame, you will understand exactly why material quality and dimensional accuracy matter so much. The tri oval exhaust body strap & rubber fits Ø110mm exhaust & has offset mount is manufactured from 304 grade stainless steel with a 1.2mm wall thickness, giving it the structural rigidity to hold your silencer firmly in place under sustained heat, vibration, and the general abuse of everyday riding. 304 stainless is widely regarded as the gold standard for performance exhaust hardware — it resists corrosion, handles high temperatures with ease, and maintains its shape over years of hard use.

The strap itself is 30mm wide, which distributes clamping load evenly across the body of your can rather than concentrating stress at a single narrow point. This wider contact area protects the finish of your performance can and significantly reduces the risk of any localised distortion or marking over time. Paired with a high-quality silicone rubber insert, the strap provides a cushioned interface between the stainless steel and your can body, absorbing vibration and preventing metal-on-metal contact that would otherwise cause wear, noise, and potential damage over the long term.

Key Features of the Tri Oval Exhaust Body Strap & Rubber Fits Ø110mm Exhaust & Has Offset Mount

• Strap Type: Tri Oval profile
• Material: 304 grade stainless steel
• Wall Thickness: 1.2mm
• Strap Width: 30mm
• Exhaust Diameter: Ø110mm
• Mount Style: Offset mount
• Rubber Insert: Silicone rubber, heat-resistant
• Finish: Natural brushed stainless

The tri oval exhaust body strap & rubber fits Ø110mm exhaust & has offset mount is compatible with any tri oval or oval-profile performance can or silencer that measures 110mm in diameter. This is a popular size across a wide range of aftermarket cans, making this strap a genuinely versatile accessory for custom builds, restorations, and direct replacements alike. If you are also upgrading your downpipes at the same time, our BSA Gold Star de res pipe 304 Stainless Steel is another premium 304 stainless piece that pairs beautifully with quality mounting hardware like this strap.

The Offset Mount Explained — What Makes the Tri Oval Exhaust Body Strap & Rubber Fits Ø110mm Exhaust & Has Offset Mount Stand Apart

The defining feature that sets this product apart from generic alternatives is its offset mount design. On many bikes — particularly those with tight clearances around the swingarm, frame rail, or bodywork — a standard straight-mount strap simply will not allow the silencer to sit in the correct position. The tri oval exhaust body strap & rubber fits Ø110mm exhaust & has offset mount allows the mounting bracket to be positioned away from the centreline of the strap, giving you the lateral clearance you need to route things cleanly and correctly.

This is not a generic, one-size-fits-all solution — it is a purposefully designed piece of hardware that solves a real fitment problem. If you are working on a build where your mounting point on the frame or subframe does not line up centrally with your can, the offset mount takes the guesswork and the bodging out of the equation entirely. Clean installs, proper alignment, and zero compromise — that is precisely what the tri oval exhaust body strap & rubber fits Ø110mm exhaust & has offset mount delivers on every single fitment.

Installation Notes for the Tri Oval Exhaust Body Strap & Rubber Fits Ø110mm Exhaust & Has Offset Mount

Fitting this strap is a straightforward process, but a few practical tips will help you get the best possible result first time. Before you begin, ensure the body of your can is clean and free from any debris or old rubber residue. Slide the silicone rubber insert into position around the can — it should sit snugly against the body without needing to be forced. The rubber is pre-shaped to conform to the tri oval profile, so alignment is intuitive and immediately obvious once the insert is in place.

Once the rubber is seated correctly, position the stainless strap over the top and align the offset mount bracket with your chosen mounting point on the frame or subframe. Because the tri oval exhaust body strap & rubber fits Ø110mm exhaust & has offset mount uses an offset design, take a moment to confirm the bracket is oriented in the correct direction before you begin tightening. Use a suitable stainless or zinc-plated fastener through the mount, torque it to the manufacturer’s specification for your bike, and check that the can is held securely without any lateral play. A correctly fitted strap should feel absolutely solid, with no movement whatsoever when the silencer is given a firm check by hand.

We always recommend a final check after your first ride. Heat cycles can cause minor settling in rubber-mounted components, and a quick visual inspection after 10 to 15 minutes of riding will confirm everything remains tight and correctly positioned. If you are fitting this strap as part of a larger custom build — perhaps alongside new downpipes or a de-cat section — now is an excellent time to check your whole performance exhaust routing for clearance and security. For those working on sportier platforms, our Aprilia RS660 De-Cat DownPipes and Triumph 765 Moto 2 De-Cat pipe are well worth exploring as part of a complete performance upgrade.

Frequently Asked Questions About the Tri Oval Exhaust Body Strap & Rubber Fits Ø110mm Exhaust & Has Offset Mount

Will this strap fit my can?
This strap is specifically designed for exhausts with a tri oval profile and a body diameter of Ø110mm. If your can is a different shape — for example, fully round or a different oval configuration — this particular strap will not provide the correct fit. Always measure your can diameter before ordering, and confirm whether the profile matches the tri oval shape. If you are unsure, feel free to contact us and we will help you identify the right strap for your specific setup.

Is the silicone rubber included?
Yes. This listing includes both the stainless steel strap body and the silicone rubber insert as a complete kit. Everything you need to mount your can securely is included — no additional purchases required.

Can I use this strap on a carbon fibre can?
Yes. The silicone rubber insert makes the tri oval exhaust body strap & rubber fits Ø110mm exhaust & has offset mount entirely suitable for use with carbon fibre cans, as it prevents direct metal contact and cushions the can body effectively, protecting the finish throughout.

How do I know which direction the offset mount should face?
The offset mount can typically be oriented in either direction depending on which side your mounting point falls. Always dry-fit the strap before final tightening to confirm the best position for your specific application and frame layout.

The tri oval exhaust body strap & rubber fits Ø110mm exhaust & has offset mount is a small component that makes a significant difference to the quality and security of your finished install. Invest in proper hardware from the start, and your performance can will stay exactly where it belongs — looking great and sounding even better, ride after ride.